Ufine Battery Invites You to KES 2024!

Meet Our Experts and Explore Our Range!

Learn More

Everything You Should Know About 18650 Battery Voltage

Share the page to

18650 battery voltage is one of the important parameters of the 18650 battery. Mastering the basic knowledge of 18650 battery voltage is important for correctly charging, discharging, and protecting the 18650 battery.

18650 battery voltage analysis  

Part 1. 18650 battery voltage analysis

single 3 2v 1500mah 18650 lithium battery at different temperatures

The voltage of 18650 batteries is generally above 3.6 V or 3.7V. This is much higher than the 1.2V voltage of nickel-cadmium and nickel-metal hydride batteries.

The voltage of a single 18650 cell is as follows:

1. 18650 battery nominal voltage

The core of the 18650 battery voltage is the working voltage, also called the nominal voltage, which is 3.7V. Some battery manufacturers have designed 18650 battery voltages to be 3.6V.

2. 18650 battery charging limit voltage

This is the maximum limit for the 18650 battery voltage, which is 4.2V. The 18650 battery charging process increases the 18650 battery voltage from 3.7V during operation to 4.2V. The process ends, indicating that the battery is fully charged. 18650 battery voltage exceeds 4.2V, which means it is overcharged. Overcharging can cause damage to 18650 batteries.

3. 18650 battery discharge termination voltage

This is the lowest working voltage at which the 18650 battery voltage drops to the point where it is no longer suitable to continue discharging, which is 2.75V. If the 18650 battery is discharged below the cut-off voltage, it is over-discharged.

Part 2. The 18650 battery voltage of different materials

18650 batteries can be divided into four types: lithium cobalt oxide, lithium manganate, ternary, and lithium iron phosphate due to different positive electrode materials. Except for LiFePo4 batteries, the remaining three materials can replace each other.

Therefore, the voltages of the lithium cobalt oxide 18650 battery and LiFePo4 18650 battery are introduced here.

Lithium cobalt oxide 18650 battery voltage

  1. Nominal voltage: 3.7V;
  2. Charging limit voltage: 4.20V;
  3. Minimum discharge termination voltage: 2.75V;
  4. Diameter: 18±0.2mm;
  5. Height: 65±2.0mm;
  6. Capacity: above 1000mAh

LiFePo4 18650 battery voltage

  1. The nominal voltage of a single cell: 3.2V;
  2. Charging limit voltage: 3.6V;
  3. Minimum discharge termination voltage: 2V;
  4. Diameter: 18±0.2mm;
  5. Height: 65±2.0mm;
  6. Capacity: smaller than the capacity of lithium cobalt oxide 18650 battery, the common capacity is 1500 mah.

Part 3. 18650 voltage chart

State of Charge (%) Voltage (V)
0 2.5
10 3.0
20 3.2
30 3.4
40 3.5
50 3.6
60 3.7
70 3.8
80 3.9
90 4.0
100 4.2

Part 4. What is the 18650 battery voltage range?

The 18650 battery voltage range depends on various factors, including its state of charge, load, temperature, battery model, quality, application requirements, and specific battery chemistry.

However, there are some general guidelines regarding the 18650 battery voltage range.

  1. Nominal Voltage: The nominal voltage of an 18650 battery is typically 3.7 volts per cell (1S). This means that when a single 18650 cell is fully charged, it will have a voltage of approximately 4.2 volts. However, it’s important to note that the nominal voltage is an average value, and the actual voltage can vary depending on the battery’s specific characteristics.
  2. Voltage Range during Discharge: As the 18650 battery discharges, its voltage gradually decreases. A discharged 18650 battery typically reaches a voltage of around 3.0-3.2 volts.
  3. Voltage Range during Charging: When an 18650 battery is being charged, its voltage increases. The charging voltage for an 18650 battery is typically around 4.2 volts per cell.
  4. Operating Voltage Range: The 18650 battery operating voltage range is typically between 3.0 and 4.2 volts per cell.

Part 5. What is the 18650 battery low voltage?

The 18650 battery low voltage typically refers to the voltage level at which the battery is considered to have reached the end of its usable capacity and should be recharged to prevent over-discharge.

18650 battery capacity curve

While the nominal voltage of an 18650 battery is typically 3.7 volts per cell (1S), the low voltage threshold is generally considered below 3.0 volts per cell. This means that when the voltage of an individual 18650 cell drops below 3.0 volts, it is considered to have reached the 18650 battery low voltage.

The specific 18650 battery low voltage threshold may vary depending on the battery’s characteristics and the manufacturer’s recommendations.

The 18650 battery low voltage can lead to over-discharge, which can damage the battery.

How to prevent the 18650 battery from low voltage?

Various methods can be employed to monitor battery voltage, such as using a LiPo voltage checker, multimeter, or battery voltage alarm. These devices can indicate the voltage level of the battery and help identify when it reaches the 18650 battery low voltage.

In addition, when the voltage of an 18650 battery drops below the recommended low voltage threshold, it is essential to recharge the battery promptly. Recharging the battery before it reaches a critically low voltage level helps maintain its lifespan, capacity, and overall performance.

Part 6. What affects the 18650 battery voltage?

Several factors can affect the 18650 battery voltage:

  1. State of Charge (SOC): The 18650 battery voltage is directly related to its state of charge. A fully charged battery will have a higher voltage, while a discharged battery will have a lower voltage.
  2. Load: The load applied to the 18650 battery voltage can be influenced by the load. Higher loads can cause the battery’s voltage to drop more quickly, while lighter loads may result in a slower voltage decrease.
  3. Temperature: The temperature of an 18650 battery can impact the 18650 battery voltage. Higher temperatures can lead to a slight increase in voltage, while lower temperatures can cause a slight decrease.
  4. Battery Chemistry: The specific chemistry of the 18650 battery can affect its voltage characteristics. Different chemistries like Li-ion, LiPo, or LiFePO4 have varying voltage profiles.
  5. Internal Resistance: The battery’s internal resistance affects its voltage. Higher internal resistance can lead to more significant voltage drops under load conditions and reduced overall voltage stability.
  6. Chemistry and Design: The specific chemistry and design of the 18650 battery can influence its voltage characteristics. Different lithium-ion chemistries have varying voltage profiles, and design factors such as electrode materials and cell construction can impact 18650 battery voltage stability.
  7. Age and Cycle Life: Over time and with repeated charge-discharge cycles, the voltage characteristics of an 18650 battery may change. Aging effects such as capacity loss, increased internal resistance, and changes in electrode structure can alter 18650 battery voltage.
  8. Charging and Discharging Rate: The rate at which an 18650 battery is charged or discharged can affect its voltage. Rapid charging or discharging can lead to voltage spikes or drops, respectively, due to kinetic limitations within the battery.

It is important to note that these factors can interact, and the 18650 battery voltage is not solely determined by one factor alone.

Part 7. FAQs

  • How does temperature affect the 18650 battery voltage?

    Lower temperatures decrease voltage, while higher temperatures increase it.
  • Why does the voltage drop under heavy loads?

    Due to internal resistance within the battery.
  • Can over-discharging harm an 18650 battery?

    Yes, it can lead to irreversible damage.
  • How does the charging rate affect the 18650 battery voltage?

     Rapid charging can cause voltage spikes.
  • What is the operational voltage range of an 18650 battery?

    Typically from 4.2 volts (fully charged) to around 2.5 volts (fully discharged).
  • How often should I monitor the voltage of my 18650 battery?

    Regularly, especially during use and charging.
  • Why is it essential to prevent over-discharge?

    To avoid damage, capacity loss, and safety hazards.
avatar

Gerald

Electronic Engineering Writer

More Articles

recommend_pic

Overview of Deep Cycle Lithium Battery

In this article, we explore the life, voltage, capacity, and charging considerations of deep cycle lithium batteries.

How Long do Lithium Batteries Last?

How long do lithium batteries last? we will explore the factors that influence the lifespan of lithium batteries and provide insights into their longevity.

How to Choose the Best LiFePO4 Battery?

Choose LiFePO4 batteries for superior performance, safety, and versatility in EVs, UPS, and backup power. This guide helps you make informed decisions.

Get 12v Lithium Car Battery As a Power Source for the Ride

Make the right choice for your vehicle's battery needs by installing a 12 volt lithium car battery. You will enjoy maintenance-free longevity with this change.

Everything About A Small Lithium Ion Battery

Discover the features, uses & future potential of a small lithium ion battery. A compact and tiny powerhouse ideal for smartphones, wearables, drones & more.

Custom Lithium-ion Battery Manufacturer

cales
en_USEnglish